Flat Roofing Materials

It’s a fact that your roof is one of the most important parts of your house and is the one thing that provides the building structure, the building occupants and the building contents with protection from the elements. Many roofs are in a state of disrepair but homeowners ignore this until the roof gets worse or until the weather gets worse. With regular maintenance and the early identification and fixing of any problems you can usually avoid the big problems that have equally big price tags attached to them. Regular maintenance in this way will also help extend the life of your roof.

Selecting flat roofing materials.

Flat roofs have extra difficulties associated with them. Because they do not slope rainwater does not automatically run down the roof and drain off. It is absolutely vital that flat roofing materials are as water resistant and water tight as possible to prevent serious damage to the roof itself and to the rest of the building and it’s contents. New types of flat roofing material are being used and while these offer more in the way of protection they are also more expensive as a general rule. There are still three main types of flat roofing materials that are used on a regular basis on new and older houses.

Built up flat roofing materials.

Built up roofing is basically just that. Built up roofing consists of laying down several layers of tar and water resistant materials and then covered with gravel. This is quite an old technique but the introduction of new waterproof materials has seen the strength and durability of this technique increase. The gravel acts as a good fire resistant layer and can be made to look very attractive. It is usually the cheapest of the flat roofing materials available, however, it is very heavy and may require strengthening of the joists. It is also impractical to use on residential houses that are being lived in because it smells terribly. The gravel itself can clog gutters and other vital aspects of water drainage.

Modified Bitumen flat roofing.

Modified bitumen is another stalwart in the world of flat roofing materials. Once upon a time it was necessary to use torchdown techniques that involved burning the roll of material onto the roof, however it is now possible to get adhesive varieties, thus cutting out the potential fire hazard that is sometimes associated. The mineral surface that is used to create modified bitumen can be created in light colors, effectively reflecting the heat and sun. This will cut down on your energy bills during the summer months, and it can even be installed by any avid (and competent) do it yourself fanatic.

Rubber membrane.

Rubber membrane is another method of coating your flat roof. As far as flat roofing materials go it is durable and resistant to general wear and tear. Leaks are easy to find and repair, but the cost is really quite high. The standard black rubber does not reflect heat and paying for a lighter membrane will cost you more, however, it is quick to fit and will cause little disruption to your house life during the process.

To get more roofing information check out Dallas Roofing.

Advice on Waterproofing Your Deck

Even if you undertook the task of building your own deck, you understand the large investment (both monetary and in time) that went into the project. Decks add beauty and value to a home, and are often the family’s favorite place on lovely afternoons. In order to protect that investment, deck waterproofing is nearly as important as making sure your basement is dry and safe from water damage.

After the completion of your deck, either you or the contracted builder should seal the wood with a water-resistant coating. Water-resistant sealants are painted on the wood, covering the entire deck. This coating helps to protect the wood from absorbing excess water. Not only does this seal the deck but also provides wonderful preservation of the deck’s beauty.

If you choose to use redwood for your deck, waterproofing can extend the life of the wood’s color. It is strongly recommended that you seal this type of wood prior to construction. This ensures that the wood was properly and evening coated with the deck waterproofing sealant. When using redwood for construction, be sure re-apply the sealant coating once every 12 to 18 months in order to prevent the wood from darkening.

Untreated wood will eventually become damaged. Being submitted to harsh weather and direct sunlight is often a killer of untreated wood. Wood can begin to rot, crack, and in severe cases, provide an open invitation to termites. Redwood is not as prone to rot and other damage as softer, lighter woods. Despite its durability, you should seriously consider waterproofing for enhanced beauty. Deck waterproofing is the only way to prevent premature damage to your deck. Decks are often a substantial investment and deck waterproofing is insurance for your peace of mind.

If you are ever in need of Roofing Tips then just give us a call.

Using a Certified Roofing Contractor

The importance of a sound roof.

Your home is designed to protect you, your family and your property from the elements, and the roof is the one part of the house that takes the most damage in providing you with this invaluable service. Yet it is the one area of the home that is most overlooked by people looking to purchase a home and by those looking to upgrade or maintain their existing home. However, without adequate maintenance and regular care your roof is liable to take leaks and can become damaged very easily in the worst of conditions.

The annual maintenance of your roof

Checking your roof should become an annual job and if you don’t feel confident enough to know where to look then you should consult a professional who will come and do the job for you. Using a certified roofing contractor means that you can be sure the person you use is a professional who knows exactly what to look for and can give you the best advice if any work does happen to need doing. The perpetual beating of the sun, rain, wind, hail, snow and forming of ice puts pressure on any material or substance and your roof is by no means an exception to this rule. A certified roofing contractor can tell you whether you have adequate protection to ensure that your roof keeps up the work it is doing.

Going up on the roof yourself

When small cracks start to appear in a roof a leak may not become immediately visible and often the water can run away to areas you are unable to see. Without actually getting up into the roof itself you may not be able to see these small areas of damage yourself and clambering on the roof yourself is not everyone’s idea of a fun Saturday afternoon. The services of a certified roofing contractor should be called on to prevent damage to your roof and possible personal injury.

A qualified roofing contractor

A certified roofing contractor is experienced and qualified enough to complete any job from certifying your roof (usually for two years, during which time they are responsible for repairs) to completely ripping down your old roof and replacing it with a new and more effective one. A certified roofing contractor can advise you of the best tools, the best materials and the best systems to use to ensure that you are giving your house the protection it truly needs.

Finding a certified roofing contractor

To find a certified roofing contractor you have several options available to you. The first is word of mouth; ask family and friends if they have used the service of a good certified roofing contractor. Never simply take someone else’s word immediately though and be sure to do your own research. Contact the people responsible for giving out licenses in your state and ask them for a list of people who are registered roofing contractors. This way you will have already verified the certificate before you even contact them.

To get more roofing information check out Dallas Roofing.